Do it Fender, do it...

Yeah, do it.......DO it.

I LOL'd soo hard, I'm trying to make it work, but the gearing is murdering the motor hardcore

Just run a 4.88 rear end.....

1:12.7xx on Hockenheim so far...

How fast is it in a straight line? Is it a 35% build?

That time was in a legal build (PI 485 w/centrifugal supercharger). I've done about 6 different builds (35% and not) and all of them end up low 1:13.xxx. As for the speed, I have no clue since I don't have the speedo in the bottom corner of my screen. I'd say about 3-5 mph slower than the faster set of the cars.

Worked with the Bender of the Fender on Project Make Boats Haul Ass tonight.  Found some things in his build that were needing to be addressed and now hes gonna give us a run at Faux Lime Rock!!!  Gonna be freakin sweet on Friday night!

didn't realize forced induction was prohibited, was located on a different thread. Which confused the crap out of me lol. 

So here is what I've done with Squid (majority of the maths by me). *NOTE DISCLAIMER* I am really f****** tired right now as I type this.

So I have done some calculations that put my POS (squid's suggestion) in the 35% bucket but with the 25% bucket power. I had ran a 1:38.031 in the 25% bucket in testing, has some room for polishing.

Here is the spreadsheet that I made, I have checked the math to see if it is accurate, and it is: https://docs.google.com/spreadsheet/ccc?key=0ArAeaPbdf_ArdDVwcGxqRjUtam9raGFvU2FUZFNlT3c&usp=sharing